ISO 3266-2010 pdf free download

ISO 3266-2010 pdf free download.Forged steel eyebolts grade 4 for general lifting purposes
Anneaux a tige de classe 4 en acier forge pour applications générales de levage.
NOTE In certain countries, It might be necessary to add regulatory mandatory marking, e.g. CE marking as defined in the applicable European Directive(s).
15 Manufacturer’s declaration
15.1 When the type testing specified in Clause 12 has been camed out with satisfactory results, the manufacturer can issue declarations of conformity for eyebolts of the same nominal dimensions, size, material, heat treatment and method of manufacture, including protective coating if applied, as the eyebolts tested.
The manufacturer shall keep a record for at least 10 years after the last declaration has been issued, of the material specification, heat treatment, dimensions, test results and all relevant data concerning the eyebolts which have satisfied the type tests. This record shall also include the manufacturing specifications which shall apply to subsequent production.
Any change in material specification, method of manufacture, including protective coating, heat treatment or any dimension outside of normal manufacturing tolerances which may lead to a modification of the mechanical properties as specified in Clause 11 shall be considered as a design change. Tests in accordance with Clause 12 shall be required before the manufacturer is permitted to issue declaration of conformity for any modified design.
15.2 The manufacturer shall provide a declaration with each consignment of eyebolts giving the following information for the consignment:
a) the business name and the full address of the manufacturer and, where applicable his authorized representative:
b) the number of this International Standard. i.e. ISO 3266:
C) the quantity and description of the eyebolt;
d) the traceability code to enable any particular eyebolt or batch of eyebolts to be identified;
e) the working load limit, expressed in tonnes;
f) the proof force applied, expressed in kilonewtons;
NOTE In certain countries, It might be necessary to add regulatory mandatory marking. e.g. CE marking as defined in the applicable European Directive(s).
The declaration shall declare that each eyebolt complies with this International Standard and is within the manufacturer’s specification of the type tested eyebolt(s). It shall also state the name and address of the testing establishment if different from the manufacturer.
The declaration shall be authenticated by a signature and shall state the name and status of the signatory.ISO 3266-2010 pdf free download.