ISO 5611-2-2015 pdf free download

ISO 5611-2-2015 pdf free download.Cartridges, type A, for indexable inserts — Part 2: Style F
Cartouches du type A, a plaquettes amovibles — Partie 2: Forme F.
4 Designation
A cartridge in accordance with this part of Iso 5611 shall be designated by:
a) “Cartridge
b) reference of this part of ISO 5611. i.e. Iso 5611-2;
c) letter symbol identifying the method of holding the insert, in accordance with ISO 5608;
d) letter symbol identifying insert shape, in accordance with ISO 1832;
e) letter symbol identifying cartridge style, in accordance with ISO 5608;
1) letter symbol identifying insert normal clearance, in accordance with ISO 1832;
g) letter symbol identifying hand of cartridge, in accordance with ISO 5608;
h) number symbol identifying tool height (shank height of cartridges and height of cutting edge), in accordance with ISO 5608;
i) number symbol identifying tool holder shank width or, for cartridges, letter C followed by a letter symbol identifying the cartridge type, in accordance with ISO 5608;
j) letter symbol identifying tool length, in accordance with ISO 5608;
k) number symbol identifying indexable insert size, In accordance with ISO 1832.
EXAMPLE Cartridge with screw clamping through hole (5) triangular indexable insert shape (T), cartridge style F (F), for the insert normal clearance 70(C), right hand cartridge (R), with height h1 = 12 mm (12), cartridge T’pe A (CA), length 1 55 mm (—), edge length 14 K 16,5 mm (16) is designated as follows:
Cartridge ISO 5611-2 —STFCR 12CA— 16
5 Material
Steel with a tensile strength of at least 1 200 N/mm2.
6 Design
6.1 Method of holding
(first letter symbol identifying the method of holding the insert)
6.1.1 Cartridge for indexable inserts with insert normal clearance a = 70
(fourth symbol identifying Insert normal clearance C)
— holding screw clamping through hole; letter symbol S. e.g. SCFCR.
6.1.2 Cartridge for indexable inserts with insert normal clearance a = 70
(fourth symbol identifying insert normal clearance C)
— holding screw clamping through hole; letter symbol S. e.g. SCFCR.
6.1.3 Cartridge for indexable inserts with insert normal clearance a = 00
(fourth symbol identifying insert normal clearance N)
— holding with hole clamping; letter symbol P, e.g. PTFNR.
6.2 Corner radius r
Cartridges in accordance with this part of ISO 5611 can be equipped with indexable inserts with cutting edge lengths 14 as specified in Table 1 and any corner radius r.
The values forfgiven in Th1ei apply to cartridges with indexable inserts having corner radii r in accordance with Table 2.
For cartridges with indexable Inserts with corner radii other than those specified in Table 2. the dimensions offshall be determined in accordance with ISO 5611-1.
The tolerances on h1 and f refer to dimensions measured with master indexable insert and master shim, if any.ISO 5611-2-2015 pdf free download.