ISO 9444-2-2009 pdf free download

ISO 9444-2-2009 pdf free download.Continuously hot-rolled stainless steel Tolerances on dimensions and form
Part 2:Wide strip and sheetlplate
Acier inoxydable laminé a chaud en continu — Tolerances sur les dimensions et Ia forme — Partie 2: Larges bandes et tOles.
NOTE 2 According to its actual width, including hot-rolled slit strips irrespective of the rolling width, hot-rolled strip is classified as
hot-rolled wide strip: strip of a width equal to or greater than 600 mm. or
hot-rolled narrow strip: strip of a width less than 600 mm.
After decoiling and cutting to length, hot-rolled narrow strip may be supplied as cut lengths.
4 Information to be supplied by the purchaser
4.1 It shall be the responsibility of the purchaser to specify all requirements that are necessary for products under this specification. Such requirements to be considered include, in the order listed, but not limited to, the following:
a) the type of delivery [see 5.1 a) and 5.1 b)J;
b) the number of this part of ISO 9444, i.e. ISO 9444-2:
c) the thickness, in millimetres (if necessary, accurate to two decimal places);
d) the width, in millimetres:
e) the condition of the edges (M = mill edges, T = trimmed edges);
f) for wide strip [see 5.1 a)J, the condition of the ends (R = rolled (mill) ends, C = cropped ends];
9) for sheet/plate, the length, in millimetres;
h) any special delivery condition (see 5.2).
EXAMPLE 1 Plate in accordance with this International Standard, with a specified thickness of 4.0 mm, a specified width of 1 200 mm, with trimmed edges (T) and a specified length of 2 500 mm.
Plate ISO 9444-2 — 4,0 c 1200T x 2500
EXAMPLE 2 Hot-rolled wide strip in accordance with this International Standard, with a specified thickness of 6.0 mm, a specified width of 1 500 mm, with mill edges (M) and mill (rolled R) ends:
Hot-rolled wide strip ISO 9444-2 — 6,0 x 1500M-R
4.2 In the absence of information in the order concerning special requirements for tolerances on dimension and shape [see 4.1 c) to 4.1 h)]. hot-rolled products covered by this part of ISO 9444 will be delivered in accordance with the basic specifications of this part of ISO 9444, i.e. with normal tolerances and/or in the usual delivery condition.ISO 9444-2-2009 pdf free download.