ISO 9445-1-2009 pdf free download

ISO 9445-1-2009 pdf free download.Continuously cold-rolled stainless steel Tolerances on dimensions and form
Part 1:Narrow strip and cut lengths
Acier inoxydable laminé a froid en continu — Tolerances sur les dimensions et Ia forme — Partie 1: Bandes étroites et feulliards coupés a Ion gueur.
precision thickness tolerance (P), with a specified width of 250 mm, precision tolerance on width (P), and with restricted tolerance on edge camber (R).
Cold-rolled narrow strip ISO 9445-1 — 0,25P x 250P-R
EXAMPLE 2 Cold-rolled cut lengths according to this part of ISO 9445 with a specified thickness of 1,00 mm, fine thickness tolerance (F), width 40 mm, fine width tolerance (F). restricted tolerance on edge camber R, length 1 000 mm, special tolerance on length (S), special tolerance on flatness (FS) and rounded edges.
Cold-rolled cut lengths ISO 9445.1 — 1,00F x 40F-R x I000S-FS, rounded edges
4.2 In the absence of information in the order concerning special requirements for tolerances on dimension, shape and edge condition [see 4.1 C), d), e), 1), g) and h)], flat products covered by this part of ISO 9445 will be delivered according to the basic specifications of this part of ISO 9445, i.e. with normal tolerances.
5 Type of delivery and delivery conditions
5.1 General
In the absence of agreements at the time of enquiry and order concerning special requirements for the delivery conditions given in 5.3, flat products covered by this part of ISO 9445 will be delivered according to the basic specifications of this part of ISO 9445.
5.2 Type of delivery
Flat products according to this part of ISO 9445 can be supplied as
a) cold-rolled narrow strip (strip in rolled widths less than 600 mm):
b) cut lengths from cold-rolled narrow strip (cut from cold-rolled narrow strip according to item 5.2 a)].
5.3 Delivery conditions of cold-rolled narrow strip and products obtained from cold-rolled narrow strip
5.3.1 Cold-rolled narrow strip and cut lengths obtained from cold-rolled narrow strip are usually supplied with cut edges. These products will have burrs caused by cutting. If there are special requirements for these edges. corresponding agreements shall be made on ordering. In this case, the strip is deemed to be cut almost free of burrs if the height of the burr is less than 10 % of the product thickness.
5.3.2 By special agreement and depending on the technical equipment of the supplier, cold-rolled narrow strip and cut lengths obtained from cold-rolled narrow strip can be delivered with special edges. e.g. deburred or rounded edges.ISO 9445-1-2009 pdf free download.