ISO 9445-2-2009 pdf free download

ISO 9445-2-2009 pdf free download.Continuously cold-rolled stainless steel Tolerances on dimensions and form
Part 2:Wide strip and platelsheet
Acier inoxydable laminé a froid en continu — Tolerances sur les dimensions et Ia forme — Partie 2: Larges bandes et tOles.
EXAMPLE 1 Cut length obtained from slit cold-rolled wide strip according to this part of ISO 9445 with a specified thickness of 1.5 mm, special thickness tolerance (S). measuring method A, with a specified width of 200 mm, special tolerance on width (S), with a specified length of 500 mm, special tolerance on length (S) and a special tolerance on flatness (FS).
Cut length from slit cold-rolled wide strip ISO 9445-2 — I ,5SA x 2005 x 500S-FS
EXAMPLE 2 Cold-rolled wide strip according to this part of ISO 9445 with a specified thickness of 0,8 mm, normal tolerance, measuring method B, width 1250 mm. with trimmed edges (T).
Cold-rolled wide strip ISO 9445-2 — 0,808 x 1250T
4.2 In the absence of information in the order concerning special requirements for tolerances on dimension and shape [see 4.1 c), e). g) and h)], flat products covered by this part of ISO 9445 will be delivered according to the basic specifications of this part of ISO 9445, i.e. with normal tolerances.
5 Type of delivery and delivery condition
5.1 General
In the absence of agreements at the time of enquiry and order concerning special requirements for the delivery conditions given in 5.3, flat products covered by this part of ISO 9445 will be delivered according to the basic specifications of this part of ISO 9445.
5.2 Type of delivery
Flat products according to this part of ISO 9445 can be supplied as
a) cold-roiled wide strip (strip in rolled widths equal to or greater than 600 mm);
b) cold-rolled plate/sheet [cut from cold-rolled wide strip according to item 5.2 a)J;
c) slit cold-rolled wide strip [manufactured by longitudinal slitting of wide strip according to item 5.2 a)1;
d) cut lengths from slit cold-rolled wide strip [cut from slit cold-rolled wide strip according to item 5.2 c)1.
5.3 Delivery condition of cold-rolled wide strip and products obtained from cold-rolled wide strip
Cold-rolled wide strip and plate/sheet cut from cold-rolled wide strip are supplied with either mill (M) or trimmed (T) edges. Slit cold-rolled wide strip and cut lengths obtained from slit cold-rolled wide strip normally have trimmed edges.ISO 9445-2-2009 pdf free download.