AWS B2.1-1-316:2018 pdf free download

AWS B2.1-1-316:2018 pdf free download.Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (5-1), 118 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70S-3, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications.
Al. Introduction
The Ibllowing procedures are here to assist standard users in submitting successful requests for official interpretations to AWS standards. Requests from the general public submitted to AWS stall or committee members that do not follow these rules may be returned to the sender unanswered. AWS reserves the right to decline answering specific requests; if AWS declines a request, AWS will provide the reason to the individual why the request was declined.
A2. Limitations
The activities ofAWS technical committees regarding interpretations are limited strictly to the interpretation of provisions of standards prepared by the committees. Neither AWS stall nor the committees are in a position to ofler interpretive or consulting services on (I) specific engineering problems, (2) requirements of standards applied to fabrications outside the SCOC of the document, or (3) points not specifically covered by the standard. In such cases, the inquirer should seek assistance from a competent engineer experienced in the particular field of interest.
A3. General Procedure for all Requests
A3.I Submission. All requests shall be sent to the Managing L)irector, AWS Standards Development. For efficient handling. it is preferred that all requests should be submitted electronically through standardsaws.org. Alternatively. requests may he mailed to:
Managing Director
Standards Development
American Welding Society
669 NW 36 St. # 130
Miami, FL 33166
A3.2 Contact Information. All inquiries shall contain the name, address, email, phone number, and employer of the inquirer.
A3.3 Scope. Each inquiry shall address one single provision of the standard unless the issue in question involves two or more interrelated provisions. The provision(s) shall be identitied in the scope of the request along with the edition of the standard (e.g., D 1 . 1:2006) that contains the provision(s) the inquirer is addressing.
A3.4 Question(s). All requests shall be stated in the form of a question that can be answered “yes” or “no”. The request shall be concise, yet complete enough to enable the committee to understand the point of the issue in question. When the point is not clearly defined, the request will be returned for clarification. Sketches should be used whenever appropriate, and all paragraphs, figures, and tables (or annexes) that bear on the issue in question shall be cited.AWS B2.1-1-316:2018 pdf free download.