Position:Home>AWS Standards>AWS G1.10M:2016 pdf free download

AWS G1.10M:2016 pdf free download

AWS G1.10M:2016 pdf free download.Guide for the Evaluation of Thermoplastic Welds.
electrofusion welding (EFW). A thermoplastic welding process where the heat for welding is provided by energizing an electrically resistive coil in the weld zone.
extrusion welding(EX). Ajoining process in which molten thermoplastic material is forced against preheated workpieces to produce the weld.
fan welding (HF). A hot gas welding method where the weld rod is fed into (he joiflt without the aid of a welding nozzle; the pressure is applied directly to the welding rod by the welder.
flaw. An interruption of the typical structure of a niaterial, such as lack of homogeneity in its structure or physical characteristics. A flaw is not necessarily a defect.
flow fusion welding. A variety of beadless welding techniques in which resultant joints are free from internal and external beads and crevices. The primary method of beadless welding involves careful ditTusion of heat through the external surfaces while maintaining internal support of material as it becomes molten. The Welding Procedure Specification (WPS) specifies the heating temperature and heating cycle during which the molten material readily joins as a single piece.
heated tool butt welding (HT). A method for joining (he ends of thermoplastic pipe or fittings in which a hot tool is placed between the pipe ends for a predetermined heating time and then the ends are pushed together with a predetermined amount of force until the joint cools.
hot gas welding (HGW). A thermoplastic welding process in which the parts are softened by hot gas and joined together.
lack of fusion. In a weld, any area or zone that lacks melting and coalescence (fusion) of a portion of the weld. This may occur between weld passes or between weld and base materials.
scraping. The process of removing a thin layer of polymer from the surface to be welded in order to eliminate surface con tarn i nat ion and OX idat ion.
shrinkage grooe. Insufficiency of material on the lateral edges of the weld due to the high thermal shrinkage or eXpanSion characteristics of thernioplasucs: this resembles an undercut or undert ill weld.
socket fusion welding (SFW). A heated tool welding process variation in which the tool is configured to heat the outside of one workpiece and the inside of the other.
speed welding (HS. A hot gas welding process variation in which the welding tip is used to feed and heat the welding tiller rod while heating the workpieces and forcing the plasticized filler into the fusion zone.AWS G1.10M:2016 pdf free download.

Download Information
Go To Download

All resources on this website are from the Internet. It is only for personal study and research. No one is allowed to use it for any commercial purpose. If you need, please buy the genuine standard. If there is any infringement of your copyright, please contact the webmaster in time, and I will correct it immediately.