CSA B625-13 pdf free download

CSA B625-13 pdf free download.Portable tanks for the transport of dangerous goods.
49CFR— the CodeofFederalRegulations(CFR), Title 49. Parts 171 to 185, HazardousMaterials Regulations.
Altemativearrangement— an approval granted by a competent authority for a portable tank that has been designed, constructed, or tested to technical requirements or testing methods other than those specified in the UN Recommendations.
ASMECode — American Society of Mechanical Engineers BoilerandPressureVesselCode,
Capacity— the maximum volume of water, normally expressed in litres, that a tank can hold at 15 °C and at an absolute pressure of 101.325 kPa.
CertificateofCompliance— a document issued by the manufacturer for each portable tank, certifying that the portable tank is in standard.
CertificateofRegistration— a document issued by the Director to a person or a facility for the purpose of registering that person or facility pursuant to the applicable requirements of this Standard. CompetentAuthority— any national body or authority designated or otherwise recognized as such for any purpose in connection with the UN Recommendations.
DesignApprovalCertifecate— a document, issued by the Design Reviewer, certifying that the design of the UN portable tank meets all applicable requirements of this Standard.
Designpressure— the pressure, including MAWP, static head, and external vacuum, as applicable, corresponding to the coincident design metal temperature, used in the calculations for determining the physical characteristics (such as minimum permissible wall thickness) of the shell.
Designreferencetemperature— the temperature at which the vapour pressure of a non-refrigerated liquefied gas en a tank is determined for the purpose of calculating the design pressure or the MAWP (as applicable).
DesignReviewAgency— the person. corporation, or partnership, independent of the manufacturer. registered with the Director pursuant to Clause 9.1.2 to review the design of any UN portable tank for compliance with this Standard.
DesignReviewEngineer— the person, corporation, or partnership registered with the Director pursuant to Clause 9.1.2 to review the design of a UN portable tank that has a minimum test pressure of 150 kPa or less, that is intended for solid or liquid dangerous goods of Class 1 or Classes 3 to 9, and that does not meet the definition of “containers within the terms of the IntemationalConventionforSafe Containers,1972, as amended, for compliance with this Standard. The Design Review Engineer may be an employee of the Tank Designer or the tank manufacturer.
DesignReviewer— the Design Review Agency or the Design Review Engineer (as applicable) who reviews the design of a UN portable tank for compliance with this Standard, and who issues the Design Approval Number and Design Approval Certificate of a UN portable tank design.CSA B625-13 pdf free download.