UL 969A-2020 pdf free download

UL 969A-2020 pdf free download.Marking and Labeling Systems — Flag Labels, Flag Tags, Wrap-Around Labels and Related Products.
4.7 LIMITED SLIPPAGE RATING — A performance rating granted to flag labels and flag tags that are intended to remain in place without significant slippage.
4.8 OVERLAMINATION — A transparent film or transparent portion of the face stock applied over the printed area for protection.
4.9 OVERPRINT COATING — A transparent coating, such as a varnish applied over the printed face stock or label stock for protection.
4.10 PRINTING PROCESS — A means by which ink is applied to a face stock.
411 RELEASE LINER – A removable component of a label or label stock that protects the adhesive prior to application.
4.12 SECUREMENT STRAP — Typically, a cable tie or similar device used to secure a Flag Tag to a cord or hose.
4.13 SUBSURFACE PRINTING — Printing on the underside of the face stock.
4.14 TEMPERATURE RATING, MAXIMUM — The highest surface temperature at which a label or tag is
intended to be used.
4.15 TEMPERATURE RATING. MINIMUM — The lowest surface temperature at which a label or tag is
intended to be used.
4.16 TOP COAT — A coating applied to the face stock or label stock to improve ink receptivity.
4.17 TOP-SURFACE PRINTING — Printing applied to the topside of the face stock or label stock.
4.18 WRAP-AROUND LABEL — An adhesive backed printed construction that is intended to be wrapped around the complete circumference of a cord or hose and may incorporate an additional clear area to overlaminate the first wrap.
PERFORMANCE
5 General
5.1 Flag labels, flag tags. and wrap-around labels, applied to representative cords and hoses and exposed to the applicable conditions as described in Section .7. shall show permanence and legibility as described in Section .
6 Test Samples
6.1 Flag label, flag tag, and wrap-around label samples
6,1.1 Samples for test are to be representative of the actual construction, i.e. overlamination, print, label stock. etc Significant construction variables such as topsurface printing or subsurface printing; top coating: face stock: overlamination or adhesive thickness range: partial adhesive coverage: differing types or colors of similar Face stock or adhesive (for example, clear, pigmented, or metallized): and alternative printing processes and inks (including flood coating for subsurface printed constructions.) reverse or positive print, etc are to be represented in the samples provided
6.1.2 Flag label samples shall be provided having the axial dimension (the length to be applied to the cord or hose) at the minimum length, as shown in Figure 6.1. in which the label is intended to be produced.
6.1.3 Flag tag samples shalt be provided with a hole for the securement strap The hole shall be located the minimum distance from the edge of the tag, as shown in Figure 6.2. in which it is intended to be produced.
6.1.4 Wrap-around label samples shall be provided having the minimum length (the length to be wrapped around the circumference of a cord or hose) and minimum width, as shown in Figure 6.3, in which the label is intended to be produced. Multiple sets of wrap-around label samples may need to be provided to represent the full range of sizes.UL 969A-2020 pdf free download.